Mine Dust Control（矿井粉尘防治）_中国矿业大学

播放

SPOC学校专有课程

Mine Dust Control（矿井粉尘防治）

第1次开课

开课时间： 2018年12月27日 ~ 2018年12月27日

学时安排： 5小时每周

当前开课已结束已有 218 人参加

立即自学

往期不提供结课证书，想参加下学期课程，点击这里预约>>

spContent=本课程系为实施安全工程专业《粉尘防治》的全英文课程教学而进行录制与讲授，视频包含粉尘性质，粉尘与健康，粉尘取样及测定，粉尘爆炸危害及防治，地面工厂粉尘防治，长壁及房柱式煤矿粉尘防治，金属非金属矿井粉尘防治，地面矿物加工及处理粉尘防治及露天矿粉尘防治。

本课程系为实施安全工程专业《粉尘防治》的全英文课程教学而进行录制与讲授，视频包含粉尘性质，粉尘与健康，粉尘取样及测定，粉尘爆炸危害及防治，地面工厂粉尘防治，长壁及房柱式煤矿粉尘防治，金属非金属矿井粉尘防治，地面矿物加工及处理粉尘防治及露天矿粉尘防治。

—— 课程团队

课程概述

Course Objectives （课程目标）：

1) To provide theoretical knowledge on dust in any surface and underground industrial engineering, including: definition; healthy considerations; explosion characteristics, etc.

2) To review the historical and engineering basis of dust protection codes and standards and current practices applicable to these issues.

3) To provide a scenario-based engineering framework for evaluating industrial dust and explosion hazards and determining appropriate protection measures.

4) To apply these engineering principles to generic industrial dust protection issues such as water spray, surfactant, seal, and optimized separation (plant layout).

成绩要求

本门课程，课堂周测试占75%、课后论文作业占25%，按百分制计分，60分至85分为合格、85分以上至100分为优秀。

详细说明如下：

1. 测验成绩：考察重要知识点的掌握：随机测验仅仅是当堂或是前面讲过的知识点，考核方式很简单，每章出具10~20道题目，包括单选、多选、判断及填空题型。该部分占总成绩的75%。

2. 课程作业：本课程共有11章内容，因此安排11次。作业主要为论述题，考察学生对所授内容的理解。该部分占总成绩的25%。

3. 本门课程安排了诸多讨论，根据学生的参与程度及反馈程度，适当增加附加分。

4. 课程测验是全英文出题，原则上要求学生使用英文进行作答。

课程大纲

No.	Topic	Teaching hours
1	1 Introduction 1.1 Dust and Its classification 1.3 Dust properties	20 min
2	2 Dust and Healthy 2.1 Dust accumulation in respiratory system 2.2 Coal Workers’ Pneumoconiosis (CWP) 2.3 Air pollution in atmosphere	60 min
3	3 Dust sampling and quantifying 3.1 Respirable dust samplers used in mining 3.2 Sampling strategies	40 min
4	4 Dust explosion and prevention 4.1 Explosion fundamentals 4.2 Coal dust combustion and explosion 4.3 Prevention practices and technologies	60 min
5	5 Dust control in surface process industries 5.1 Basics of dust collector systems 5.2 Airflow and dust control 5.3 Exhaust systems design	40 min
6	6 Dust control in underground coal mining (1)- Longwall 6.1 Dust distribution in mines 6.2 Control in working/development face 6.3 Control in underground coal transportation	40 min
7	7 Dust control in underground coal mining (2)- R&P 7.1 Continuous Miner dust control 7.2 Ventilation Control 7.3 Dust control in roof bolter	30 min
8	8 Respiratory protection 8.1 Personal respiratory protection equipment 8.2 Classification of working environment 8.3 Selection of respiratory protection equipment	60 min
9	9 Dust control in underground stone and metal/non-metal mining 9.1 Crushing facilities 9.2 Production shots 9.3 Drilling	30 min
10	10 Dust control in minerals mining and processing 10.1 Wet spray systems 10.2 Crushing milling and screening 10.3 Haul Roads, stockpiles and open area	50 min
11	11 Dust control in surface mining 11.1 Drill dust filtration and collection 11.2 Haulage road dust control 11.3 Hopper dump control	40 min

展开全部

参考资料

Textbook（课程教科书）

Cheng, J. (2017). Dust Prevention And Control In Mining And Mineral Processing, China University of Mining & Technology Press, Xuzhou, China. ISBN: 978-7-5646-3342-4

References (主要参考文献，不限于下述列出的）：

Theory of Coal Mine Dust and Control (in Chinese), by Shengqiang Yang, et al., CUMT press, 2010

Best Practice for Dust Control in Coal Mining, by Jay F. Colinet, et al., National Institute for Occupational Safety and Healthy (NIOSH), IC 9517, 2010

Best Practice for Dust Control in Metal/ Nonmetal Mining, by Jay F. Colinet, et al., National Institute for Occupational Safety and Healthy (NIOSH), IC 9521, 2010

Dust Control Handbook for Industrial Minerals Mining and Processing, by Andrew B. Cecala, et al., National Institute for Occupational Safety and Healthy (NIOSH), IR 9689, 2012

Distributed Research Report and Papers.